Powder Coating Services in San Marcos, CA

What Is Powder Coating?

The etch is required to remove the zinc corrosion products which begin to form almost immediately the zinc is removed from the galvanizing kettle. The grain refiner ensures a fine phosphate is produced.

Powder coating is the technique of applying dry paint to a part. The final cured coating is the same as a 2-pack wet paint. In normal wet painting such as house paints, the solids are in suspension in a liquid carrier, which must evaporate before the solid paint coating is produced. In powder coating, the powdered paint may be applied by either of two techniques.

• The item is lowered into a fluidizes bed of the powder, which may or may not be electro-statically charged, or
• The powdered paint is electro-statically charged and sprayed onto the part.

The part is then placed in an oven and the powder particles melt and coalesce to form a continuous film.
There are two main types of powder available to the surface finisher:

• Thermoplastic powders that will melt when heated, and
• Thermosetting powders that will not melt upon reheating. During the curing process (in the oven) a chemical cross-linking reaction is triggered at the curing temperature and it is this chemical reaction which gives the powder coating many of its desirable prop

The Process Looks Like:

Removal of oil, dirt, lubrication greases, metal oxides, welding scale etc. is essential prior to the powder coating process. It can be done by a variety of chemical and mechanical methods. The selection of the method depends on the size and the material of the part to be powder coated, the type of impurities to be removed and the performance requirement of the finished product.

Chemical pre-treatments involve the use of phosphates or chromates in submersion or spray application. These often occur in multiple stages and consist of degreasing, etching, de-smutting, various rinses and the final phosphating or chromating of the substrate. The pre-treatment process both cleans and improves bonding of the powder to the metal. Recent additional processes have been developed that avoid the use of chromates, as these can be toxic to the environment. Titanium zirconium and silanes offer similar performance against corrosion and adhesion of the powder.

In many high end applications, the part is electrocoated following the pretreatment process, and subsequent to the powder coating application. This has been particularly useful in automotive and other applications requiring high end performance characteristics.

Another method of preparing the surface prior to coating is known as abrasive blasting or sandblasting and shot blasting. Blast media and blasting abrasives are used to provide surface texturing and preparation, etching, finishing, and degreasing for products made of wood, plastic, or glass. The most important properties to consider are chemical composition and density; particle shape and size; and impact resistance.

Silicon carbide grit blast medium is brittle, sharp, and suitable for grinding metals and low-tensile strength, non-metallic materials. Plastic media blast equipment uses plastic abrasives that are sensitive to substrates such as 

aluminum, but still suitable for de-coating and surface finishing. Sand blast medium uses high-purity crystals that have low-metal content. Glass bead blast medium contains glass beads of various sizes.

Cast steel shot or steel grit is used to clean and prepare the surface before coating. Shot blasting recycles the media and is environmentally friendly. This method of preparation is highly efficient on steel parts such as I-beams, angles, pipes, tubes and large fabricated pieces.

Different powder coating applications can require alternative methods of preparation such as abrasive blasting prior to coating. The online consumer market typically offers media blasting services coupled with their coating services at additional costs.

Powder Application Processes:

The most common way of applying the powder coating to metal objects is to spray the powder using an electrostatic gun, or corona gun. The gun imparts a positive electric charge to the powder, which is then sprayed towards the grounded object by mechanical or compressed air spraying and then accelerated toward the workpiece by the powerful electrostatic charge. There are a wide variety of spray nozzles available for use in electrostatic coating. The type of nozzle used will depend on the shape of the workpiece to be painted and the consistency of the paint. The object is then heated, and the powder melts into a uniform film, and is then cooled to form a hard coating. It is also common to heat the metal first and then spray the powder onto the hot substrate. Preheating can help to achieve a more uniform finish but can also create other problems, such as runs caused by excess powder.

Another type of gun is called a tribo gun, which charges the powder by (triboelectric) friction. In this case, the powder picks up a positive charge while rubbing along the wall of a Teflon tube inside the barrel of the gun. These charged powder particles then adhere to the grounded substrate. Using a tribo gun requires a different formulation of powder than the more common corona guns. Tribo guns are not subject to some of the problems associated with corona guns, however, such as back ionization and the Faraday cage effect.

Powder can also be applied using specifically adapted electrostatic discs.

Curing:

When a thermoset powder is exposed to elevated temperature, it begins to melt, flows out, and then chemically reacts to form a higher molecular weight polymer in a network-like structure. This cure process, called crosslinking, requires a certain temperature for a certain length of time in order to reach full cure and establish the full film properties for which the material was designed. Normally the powders cure at 200 °C (390 °F) for 10 minutes. The curing schedule could vary according to the manufacturer's specifications. The application of energy to the product to be cured can be accomplished by convection cure ovens, infrared cure ovens, or by laser curing process. The latter demonstrates significant reduction of curing time.

Get in touch with us if you have any questions about our processes.

Exceptional Powder Coating Services

Looking for top-tier powder coating services? San Marcos Polishing has you covered. With over 20 years of experience, our family-operated business excels in a range of coating solutions to meet your specific needs. From rim and wheel coatings to chassis and frame coatings, our skilled team delivers seamless workmanship using quality products, ensuring your satisfaction.

Our services include:

• Rim powder coating
• Wheel powder coating
• Brake caliper powder coating
• Frame coating
• Chassis coating
• Exterior and interior coatings
• Clear coating
• Custom design services

Contact us to discover how we can enhance your vehicle.

Why You Need Powder Coating Services

Choosing powder coating services is a smart investment for several reasons. Our advanced techniques deliver superior protection and aesthetic appeal for various vehicle components.

• Enhanced durability for rims and wheels
• Increased resistance to rust and corrosion
• Improved appearance with a custom finish
• Long-lasting protection for brake calipers
• Superior adhesion for exterior and interior parts
• Custom designs to match your style

Reach out to us to learn more about our powder coating solutions and how they can benefit you.

Experience the Benefits of Our Services

San Marcos Polishing stands out for many reasons. We offer competitive pricing, ensuring you get the best value for your money while enjoying premium custom services.

• Competitive pricing
• Family-owned and operated
• Free estimates within 24 hours
• Licensed and insured
• Labor warranties available
• Serving North County San Diego since 1988
• Military and veterans warranties
• Seamless workmanship
• Quality products
• Se habla Español

Contact us today to receive the unparalleled service you deserve.

Contact San Marcos Polishing

Ready to transform your vehicle with our exceptional powder coating services? Get in touch with San Marcos Polishing today. Our friendly, knowledgeable team is here to help you achieve the perfect finish for your vehicle.